Walk down Sembudoss Street asking for a gate valve and you will be shown steel valves for process lines. Ask for a sluice valve and you will be shown iron valves for water mains. Same mechanism. Different trade.
How it works
A wedge-shaped gate is lifted by a spindle, clear of the bore, to open; lowered into the seat, to shut. Fully open, nothing is left in the flow path.
The standard
IS 14846:2000, Sluice valve for water works purposes (50 to 1200 mm size). It replaced IS 780 (valves up to 300 mm) and IS 2906 (above 300 mm).
CI or DI?
Cast iron bodies are economical for normal water works service. Ductile iron is tougher, less brittle under shock and often specified for higher pressures and buried mains. Follow the material and pressure rating your specification names.
Rising or non-rising spindle?
A rising spindle shows at a glance whether the valve is open, but needs headroom. A non-rising spindle suits valve chambers and buried valves operated with a key on a cap top.
Sluice valve or butterfly valve?
See butterfly vs gate vs ball.
Need it quoted?
Send your BOQ, drawing or list of sizes through Request a quote. One quotation for the complete line.
Ranges in this guide:Gate and sluice valves