- Home
- Industries
- Large-scale industry
Industries
Large-scale industry
Valves, expansion joints and insulation for power, steel and cement plant utilities.
Industrial valves for power plants and utilities do the unglamorous work: cooling water, fire water, compressed air and steam, all day, every day.
- Cooling water: large butterfly valves, gear or actuator operated, with rubber expansion joints at the pumps.
- Fire fighting: butterfly, gate and check valves for hydrant and sprinkler lines.
- Steam and hot lines: globe and gate valves, metallic expansion joints and hot insulation with cladding.
Products for large-scale industry
ACO Coalisator-P, free standing
Model NS 1.5, NS 3 · EN 858
Compact Class I light-oil separator in polyethylene with a coalescence insert and automatic float closure, for free-standing installation.

ACO Multiline
Model V 100 – 500 · DIN EN 1433
Polymer concrete channel drain with a V-profile, for footpaths up to heavy yards. One channel body takes every width and edge rail, load class A 15 to E 600.
ACO Coalisator-P, below ground
Model NS 1.5, NS 3 · EN 858, DIN 1999-100
Compact Class I light-oil separator for below ground, with a height-adjustable top and B 125 cast iron cover, to EN 858.

ACO Monoblock
UNI EN 1433
Monolithic polymer concrete drainage channel with no loose grating, for motorways, logistics yards and airports. Load class up to F 900.

ACO Oleopator-P
Model NS 3 – NS 10 · EN 858, DIN 1999-100
Below-ground light-oil separator in polyethylene, NS 3 to NS 10, to EN 858, for fuel stations, workshops and car parks.

ACO Oleopass-P
Model NS 3 – NS 10 · EN 858, DIN 1999-100
Below-ground light-oil separator in polyethylene with an integrated bypass, NS 3 to NS 10, to EN 858.

ACO Qmax Neo
Model Neo 300, Neo 600
Polypropylene slot drain with ductile iron edge rails and large retention volume, for load classes A 15 to F 900. Nominal sizes ø 300 and ø 600 mm.

ACO KerbDrain™
Model Kapacity 480, Kompact 305 · DIN 19580
One-piece resin concrete kerb and drainage unit for roads, roundabouts, car parks and petrol stations. Load Class D to DIN 19580.

ACO Oleopator P, free standing
Model NS 3 – NS 30 · DIN EN 858, Class I
Free-standing Class I light-oil separator in welded polyethylene, round, oval or segment, NS 3 to NS 30, for frost-free rooms.

ACO Oleolift P
Model NS 1.5 – NS 10 · DIN EN 858, Class I
Free-standing Class I oil separator with built-in submersible pumps, for basements below the sewer, NS 1.5 to NS 10.

ACO Oleopator G
EN 858, Class I
Vertical GRP light-oil separator, Class I to EN 858, with a coalescence insert. Light to handle on site.

ACO Oleopator G-H
EN 858, Class I
Horizontal GRP light-oil separator, Class I to EN 858, with a coalescence insert. Light to handle on site.

ACO Oleopator G-H NS100+
Model NS 100+ · EN 858, Class I
Horizontal GRP light-oil separator, Class I to EN 858, with a coalescence insert. Light to handle on site.

ACO light liquid separator with bypass G
EN 858, Class I
Vertical GRP light-oil separator, Class I to EN 858, with a coalescence insert and integrated bypass. Light to handle on site.

ACO light liquid separator with bypass G-H
EN 858, Class I
Horizontal GRP light-oil separator, Class I to EN 858, with a coalescence insert and integrated bypass. Light to handle on site.
Questions
Which valves are used in fire fighting systems?
Butterfly and gate valves for isolation, check valves on pumps and risers, and the landing valves and alarm valves the fire code names, usually with approvals the authority accepts.
Which valves are used on cooling water lines?
Large butterfly valves, gear or actuator operated, with dual plate check valves on the pumps and rubber expansion joints to isolate vibration.
Do you supply metallic expansion joints for steam?
Yes, with stainless steel bellows, designed for the line's pressure, temperature and movement.
A size or rating not listed?
Our procurement desk sources it, from Valvetech or anywhere in the world.