Guide

PN 10 vs PN 16: what does PN 16 mean?

PN 16 means a nominal pressure of 16 bar at 20 °C, about 232 psi; PN 10 means 10 bar, about 145 psi. The number also fixes which flange drilling a valve or flange matches.

Published · Updated

PN stands for pression nominale, nominal pressure. It is a reference number, not a test pressure, and not a promise at every temperature.

What PN 16 tells you

  • Pressure: 16 bar at 20 °C. At higher temperatures the allowed pressure falls; the maker's pressure-temperature table says by how much.
  • Drilling: the flange's outside diameter, bolt circle and bolt count, as set out in EN 1092-1.

Can a PN 16 valve go on a PN 10 flange?

Up to DN 150, PN 10 and PN 16 flanges are drilled alike in EN 1092-1, so the valve bolts up and the line is rated at the lower figure, PN 10. From DN 200 the drillings differ: order the valve drilled to match.

Is PN 16 the same as Class 150?

No. Class 150 is an ASME rating with its own flange drilling, roughly 20 bar for carbon steel at ambient temperature. PN 16 and Class 150 flanges do not generally bolt together.

DN 100 PN 16, decoded

A valve or flange of nominal size 100 mm (4 inches), rated 16 bar at 20 °C, drilled to PN 16. See the DN to inch chart.

Need it quoted?

Send your BOQ, drawing or list of sizes through Request a quote. One quotation for the complete line.

Ranges in this guide:ValvesButterfly valves

A size or rating not listed?

Our procurement desk sources it, from Valvetech or anywhere in the world.