Why are expansion joints used in piping at all? Because steel grows when it heats, pumps shake when they run, and foundations settle. Something has to give. Better a joint than a flange.
| Rubber bellow | Metallic bellow | |
|---|---|---|
| Typical service | Water, sewage, cooling water, pump suction and discharge | Steam, hot oil, exhaust, thermic fluid |
| Temperature | Limited by the rubber, generally moderate | High |
| Vibration and noise | Absorbs well | Absorbs less |
| Movement | Axial, lateral and angular, in small amounts | Large axial movement, designed per line |
| Chemical resistance | Set by the rubber: EPDM, neoprene, nitrile | Set by the stainless steel grade |
Single sphere or double sphere?
A double sphere rubber joint takes more movement and isolates vibration better; a single sphere joint is shorter and stiffer.
Fitting a rubber bellow at a pump
Fit it close to the pump, support the pipe on both sides so the joint carries no pipe weight, and add tie rods where the line's pressure thrust would otherwise stretch it.
Need it quoted?
Send your BOQ, drawing or list of sizes through Request a quote. One quotation for the complete line.
Ranges in this guide:Expansion joints