Most of what is written about this standard online is written to sell a licence. This is written for the buyer, the consultant and the contractor who has to accept the valve.
The standard
IS 13095, Butterfly valves for general purposes. The current edition, published in 2020, replaced the 1991 edition; BIS set 25-Nov-2021 as the last date for implementing it. BIS has since issued amendments (Amendment No. 2 with an implementation date of 24-Aug-2025) and in 2025 circulated a draft revision for comment, so always check the amendments in force on the BIS website.
Is BIS certification mandatory?
Yes, for the butterfly valves the order covers. The Butterfly Valves (Quality Control) Order, 2020 came into force on 01-Jan-2021. From then, such valves may be made, sold or imported only under a BIS licence and with the Standard Mark.
How to check a valve's licence
The Standard Mark on the body carries a licence number, CM/L followed by digits. Enter it in the BIS Care app or the licence search on the BIS website to see the licensee, the standard and whether the licence is operative.
What to state when you order
Size (DN), pressure rating, body type (wafer, lug, double flanged), flange drilling, body, disc and seat materials, operation, and that the valve is to conform to the standard.
Need it quoted?
Send your BOQ, drawing or list of sizes through Request a quote. One quotation for the complete line.
Ranges in this guide:Butterfly valves