Guide

DWC pipe sizes in mm, and SN 4 vs SN 8

DWC pipes are named by outside diameter in millimetres, made in sizes from about 75 to 800 mm, and rated SN 4 or SN 8: SN 8 is twice as stiff and goes under deeper cover or heavier traffic.

Published · Updated

A DWC pipe is two pipes fused into one: a corrugated outer wall that carries the soil load, and a smooth inner wall that carries the flow.

Sizes

Indian makers list DWC drainage pipe from about 75 mm to 800 mm outside diameter, with 90, 110, 160, 200, 250 and 300 mm among the most used for drainage and cable ducts. Check the maker's chart for the inside diameter, which sets the flow.

SN 4 vs SN 8

SN is the nominal ring stiffness, in kN/m²: how hard the pipe resists being squashed out of round. SN 8 is twice as stiff as SN 4. Use SN 8 under roads, under deep fill or where the soil is poor; SN 4 under footpaths, gardens and shallow cover, if the designer allows.

The standard

Drainage and sewer pipe: IS 16098 (Part 2), structured-wall polyethylene pipe with a smooth inside and corrugated outside, for non-pressure underground drainage and sewerage.

DWC or HDPE pressure pipe?

DWC is for gravity flow and ducts only. A pumped rising main needs a solid-wall pressure pipe.

Need it quoted?

Send your BOQ, drawing or list of sizes through Request a quote. One quotation for the complete line.

Ranges in this guide:DWC pipes

A size or rating not listed?

Our procurement desk sources it, from Valvetech or anywhere in the world.