Two halves, one cam lever pair, and a gasket. The rest is detail, and the detail is in the letters.
| Type | Half | Other end |
|---|---|---|
| A | Male adapter | Female thread |
| B | Female coupler | Male thread |
| C | Female coupler | Hose shank |
| D | Female coupler | Female thread |
| E | Male adapter | Hose shank |
| F | Male adapter | Male thread |
| DC (dust cap) | Female coupler | Closed |
| DP (dust plug) | Male adapter | Closed |
Type A vs type F
Both are male adapters. Type A screws onto a male-threaded pipe end (it has the female thread); type F screws into a female-threaded port.
Sizes
Camlocks are named by the nominal hose or pipe size, commonly ½, ¾, 1, 1¼, 1½, 2, 2½, 3, 4 and 6 inches. Threads are BSP or NPT: state which, because they do not interchange.
Standards
Most couplings follow the American A-A-59326 pattern (formerly MIL-C-27487) or the European EN 14420-7, whose groove dimensions make couplings of the same size from different makers fit together.
Materials and gaskets
SS 316 for chemicals and food, SS 304 for general use, aluminium for fuel tankers, brass for water and oil, PP for acids. Gaskets in nitrile for fuels, EPDM for water and many chemicals, Viton for solvents.
Need it quoted?
Send your BOQ, drawing or list of sizes through Request a quote. One quotation for the complete line.
Ranges in this guide:Camlock couplings