Guide

Butterfly valve seat materials: EPDM vs nitrile vs Viton vs PTFE

Choose EPDM for water, nitrile for oils and fuels, Viton (FKM) for hotter and more aggressive chemicals, and PTFE for the widest chemical resistance. Confirm the exact temperature limit on the valve maker's datasheet.

Published · Updated

The seat is the part that touches the fluid, and so the part that fails first when the choice is wrong.

SeatGood forAvoidTypical temperature
EPDMWater, drinking water, hot water, mild acids and alkalis, airOils, fuels, solventsAbout −20 to 120 °C
Nitrile (NBR, Buna-N)Oils, diesel, fuels, LPG vapour, waterOzone, strong acids, ketonesAbout −10 to 80 °C
Viton (FKM)Hot oils, many acids and solventsKetones, hot water and steamAbout −15 to 180 °C
PTFE (lined valves)Almost all chemicalsAbrasive slurriesAbout −20 to 180 °C

Temperatures are typical of makers' published ranges; each maker rates its own compound, so the datasheet governs.

EPDM or nitrile for water?

EPDM. It handles hot water and outdoor exposure that harden nitrile. Choose nitrile only when the water carries oil.

Disc materials

CI or DI with nylon or epoxy coating for water; SS 304 or SS 316 for treated water and mild chemicals; aluminium bronze for sea water.

Need it quoted?

Send your BOQ, drawing or list of sizes through Request a quote. One quotation for the complete line.

Ranges in this guide:Butterfly valves

A size or rating not listed?

Our procurement desk sources it, from Valvetech or anywhere in the world.